现在3ds用路由器擦肩应该如何设置?
- arion_00火纹快来了这几天准备把路由器擦肩再搞起来,不过把当时设置好的路由器再接上发现nintendo zone那个图标不闪光了,放了一会好像也没擦到人,现在如果要用路由器擦肩应该如何设置?
- yuzhao1985mark一下,之前家里换光纤,原有的配置失效了,求大神指导一下如何架设。
之前用的是隔壁老赵的dd-wrt方案。主路由下挂刷dd-wrt的路由。现在的情况是光猫为1级,原来的主路由变2级,dd-wrt变3级。
目前2级路由接电脑上网,电脑只能访问2级路由,1级的光猫和3级的路由设置界面都无法访问 - 琴酒1级光猫 改桥接
2级主路由拨号
3级DDWRT和2级一个网段就好了
23一个网段 1另一个网段
现在DDWRT 还是GBATEMP那个脚本
不过还是建议SSID用 attwifi NZ@McD1不能上ESHOP不能开游览器复制代码- Router instructions:
- Warning: for BASE1,BASE16,BASE256,GBATEMP lists SSID must be changed manually to NZ@McD1
- Warning: for 3DS firmware version 9.0.0-9.2.0 only BASE1,BASE16,BASE256,GBATEMP,78 lists can be used if wireless security is enabled
- Warning: for 3DS firmware version 9.3.0+ wireless security must be disabled
- - open a Telnet/SSH client and execute
- wget -O /tmp/nzone.sh http://nintendozone.no-ip.org/install; chmod +x /tmp/nzone.sh; /tmp/nzone.sh BASE16,GBATEMP
- (alternatively you can do this in a DD-WRT WEB GUI Administration - Commands or WL500G WEB GUI Setup - System Command)
- - wait for the Homepass
- If your WRT router have a WPS/SES/EZ-Setup button it will toggle cron job on and off every button press, this is also helpful if cron daemon falls asleep on several DD-WRT builds.
- MAC lists can be altered by crontab, as well as a MAC change time period (alternatively you can use the DD-WRT WEB GUI at Administration - Management - Cron)
- You can also start/stop the AP respectively by command
- /tmp/nzone start
- or
- /tmp/nzone stop
- (/usr/local/sbin/nzone for WL500G, /usr/sbin/nzone for OpenWrt)
- the latter will also revert access point MAC and SSID to the selected in the WEB GUI settings.
- Router instructions:
- yuzhao1985谢巨巨指点,我回家试试
- arion_00我不用脚本的,只是用usb无线路由改了个mac,是不是还是按以前那样就能擦?
- 赤魔法师attwifi的是不是不能用密码?
我用NZ那个不设密码倒是能擦到
可是自动换mad的脚本有点问题 - 妮贝雅必须不设密码
- 赤魔法师为何不设密码只有NZ可以擦?
- 妮贝雅我使用小米wifi共享网络然后用工具随机修改小米wifi的MAC的,,反正前天att那啥还用着没问题的。。