[20190609更新ipv6双栈]100000pps路由ERL3,路由器折腾第二季
- 数不清
- 911boy
- 数不清
- 真电工可以买一对玩无缝切换了,希望价格不会太夸张
- tmqhliu1.8 固件出来乐~
- tmqhliu1.8固件中的 strongswan 已经升级到5.2版本,是时候抛弃ss和openvpn隧道了,果断ipsec隧道走起吧。
- tkomg
- stevenflp马克HiPDA·NG
- 真电工回复407#tkomg
这是mikrotik hap的功能,网上有教程的,但是没实践过。
原理是一个ap兼任ac,其他ap无缝切换,如果可行,这可能是最便宜的真正无缝了。
tp的便宜但不是无缝,ubnt uap无缝不稳定。 - 真电工回复406#tmqhliu
期待你实践帖子 vps通过site2site和路由通讯吗?策略路由怎么走? - lwd2136
- rsrteam技术性马克来自地球带着爱
- oxygen427用了半年了 稳定 发热还行
- monkeyd请教楼主动态IP配置L2TP时那个外网IP怎么搞,可以用DDNS吗HiPDA·NG
- 真电工
- monkeyd我看那个教程最后一条命令有一部分是个IP 是eth0的外网IP,那个IP的话是用你引用的那个获取外网IP的方法搞还是做DDNS然后填DDNS的域名HiPDA·NG
- 真电工回复419#monkeyd
对家里局域网内,最简做法就是在dnsmasq内直接写一条解析的语句。
由于外网无法实时获得路由的ip(绝大多数pppoe案例),用域名方式访问路由器需要解析出其ip,比较粗暴方式就是取得其外网接口ip,然后把ip更新到域名服务器上 - 数不清1.8.5 traffic Analysis有改善
- 真电工
- 数不清
- fyi151erx到手,来充电HiPDA·NG
- lwd2136
- 真电工strongswan ,
参考文档:
https://zh.opensuse.org/SDB:Setup_Ipsec_VPN_with_Strongswan
https://gist.github.com/losisli/11081793
最近想弄下,不知道中国电信下靠谱的vps是那家, - lwd2136
- lwd2136回复427#真电工
都不稳定 需要服务器群 iOS fly ~ - 真电工这个一般人玩不起
- lwd2136
- 真电工
- lwd2136
- fyi151erx,有两个问题求指点:
1、pppoe拨号的外网地址尝自己换,如何查看原因?
2、按照向导和教程配置的,eth0 Poe供电为lan1,eth1为wan,eth234为lan2,switch0选了eth0、2、3、4。出现pppoe0 disconnect的问题,不知道怎么解决'?什么原因导致的。 iOS fly ~ - lwd2136回复435#Memories
自用了两年 没啥问题 iOS fly ~ - 真电工运行tail /var/log/messages 可以显示最近的信息,后面加个管道|grep 关键字可以过滤信息
- fyi151我用锐捷AP,能连上无线获取IP,但上不了网,又是怎么回事啊?HiPDA·NG
- 里欧那多
马克一下
- 真电工pc 直接用网线连接可以上网吗?
- fyi151把弱电箱拆开重置了路由,好了。HiPDA·NG
- fyi151麻烦大神帮我看看
回复437#真电工 - 真电工回复442#fyi151
你需要在出现故障时运行这个代码,否则无法获得有用的信息,这里面都是upnp的log,没有相关信。根据你描述应该是dnsmasq出问题概率大点,另外我也是初学者,不是啥大神,大家互相探讨共同折腾。
这论坛上真正高手都在潜水呵呵 - fyi151
- 真电工
- fyi151
- 数不清EdgeMAX EdgeRouter software release v1.9.0
http://bbs.ubnt.com.cn/forum.php ... &extra=page%3D1
New EdgeMAX software version v1.9.0 for EdgeRouter products has been released and is available here:
ERLite-3 and ERPoe-5:
https://dl.ubnt.com/firmwares/ed ... .v1.9.0.4901118.tar
(SHA1: 9b80ee1ff776d99eb1db11fc85498ac981712533) (GPL archive)
ER-8, ERPro-8, and EP-R8:
https://dl.ubnt.com/firmwares/ed ... .v1.9.0.4901118.tar
(SHA1: e7f2c7e29a3a9ac4d40b0d27bff797a63c3bb869) (GPL archive)
ER-X, ER-X-SFP, and EP-R6:
https://dl.ubnt.com/firmwares/ed ... .v1.9.0.4901118.tar
(SHA1: ef7013a5bfb38550104660acd413a9a7a114073a) (GPL archive)
Note: The ER-X/ER-X-SFP/EP-R6 has more limited storage, and in some cases upgrade may fail due to not enough space. If this happens, remove the old backup image first (using "delete system image" command, see here for more details) before doing upgrade.
Some notable features/enhancements in the 1.9.0 release include:
New "Basic Queue" QoS feature for configuring simple QoS policies
IPsec crypto offload support for ER-X platform (ER-X, ER-X-SFP, and EP-R6 models)
Add support for VLAN and DHCPv6 PD options to the basic Web UI setup wizard
New "switch" setup wizard for ER-X platform
Use kernel mode for L2TP/IPsec server for improved performance
More details can be found in the release notes below. I would like to thank everyone for their participation in the community, as always helping with testing, reporting issues, providing feedback, suggestions, even patches! We certainly could not have done it without you Thank you very much! - 真电工
- 数不清